LINATHENE® LL405 by USI is a water insoluble, linear low-density polyethylene (LLDPE) grade. Exhibits good environmental stress crack resistance, outstanding chemical inertness, low temperature impact strength, rigidity, toughness and good moldability. Provides excellent stiffness, great surface gloss and less deformation. Suitable for processing by rotational and injection molding. LINATHENE® LL405 by USI can be ground into powders then molded into large parts such as storage tanks for chemicals & water, toolboxes and water drums. Recommended for mobile toilet, portable traffic barrier, rubbish chute and plastic slide.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
LINATHENE® LL405 properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flash Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Film Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore D | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Decomposition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Spontaneous Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Temperature Brittleness | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |