mLLD1916F by Trademark Plastics is a metallocene linear low density polyethylene (mLLDPE) grade. Contains processing aid, high slip and antiblocking additives. Exhibits excellent haze, gloss, strength and heat seal. Designed for blown film extrusion method. mLLD1916F is recommended for enhancing monolayer films, seal layer in coextrusions, heavy duty- and high strength clarity packaging. Complies with FDA regulations in 21 CFR, section 177.1520, paragraph C, section 2.1.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
mLLD1916F properties
Films properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Film Puncture Force | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 1% Secant Modulus, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 1% Secant Modulus, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Desity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Seal Initiation Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
mLLD1916F Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow up ratio (measured on a 1.0 mil) | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |