LLB1918C by Trademark Plastics is a linear low density polyethylene (LLDPE) grade with butene co-monomer. Contains high antiblocking additive and exhibits excellent puncture, drawdown and heat seal. Designed for blown film extrusion method. LLB1918C is recommended for heavy duty sacks, liners and food- and commercial packaging. Complies with FDA regulations in 21 CFR, section 177.1520, paragraph C, section 3.1(a).
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
LLB1918C properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 1% Secant Modulus, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 1% Secant Modulus, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
LLB1918C Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow up ratio (measured on a 1.0 mil) | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |