Sarlink® TPE ML-1150B BLK is a general purpose, UV stabilized and resilient thermoplastic elastomer (TPE) grade by Teknor Apex, reinforced with filler. Exhibits low hardness, high density, good adhesion, flexibility and moldability. Provides good tear strength, toughness, high specific gravity and low flow. Shows chemical-, UV-, weather- and sunlight resistance. Sarlink® TPE ML-1150B BLK is suitable for processing by injection molding. Used in rubber replacement, automotive interior parts, flexible grips, grommets, knobs and soft touch applications. Meets RoHS.
Product family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Sarlink® TPE ML-1150B BLK properties
Aging properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Change in Durometer (Shore) Hardness in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Durometer (Shore) Hardness in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Durometer (Shore) Hardness in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Durometer (Shore) Hardness in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Durometer (Shore) Hardness in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Durometer (Shore) Hardness in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strain at break in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strain at break in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strain at break in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strain at break in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strength in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strength in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strength in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strength in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strength in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strength in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strength in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Change in Tensile Strength in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Stress | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Stress | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Viscosity, Apparent | 0.0 Visible After Login | Visible After Login | Visible After Login |
Others properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Xenon Weatherometer | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Xenon Weatherometer | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Sarlink® TPE ML-1150B BLK Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Cushion | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Front Temperature | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Injection Rate | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Middle Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Rear Temperature | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |