TASNEE LD 4025AS by Tasnee is a translucent to white colored, odorless, water insoluble, shrinkable, sealable, low-density polyethylene (LDPE) grade. It is available in the form of pellets and manufactured using Lupotech T method. Possesses excellent mechanical & optical properties, slip and anti-blocking additives. Exhibits good permeability for carbon dioxide & oxygen and non-permeability for water & steam. Provides high resistance to puncture, tear, non-oxidizing acids, bases, salts and their solutions. Is suitable for processing by mono and multilayer thin gauge blown and cast film extrusion. TASNEE LD 4025AS is recommended for shrink & food packaging films, lamination film, laundry bags and food packaging pouches.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
TASNEE LD 4025AS properties
Films properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strain, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Coefficient of Friction (COF) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Stress | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Decomposition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Ignition temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
TASNEE LD 4025AS Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow Up Ratio (BUR) | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Recommended Thickness | Visible After Login | Visible After Login | |