YUCLAIR® FT850 by SK geo centric is a food contact acceptable, linear low density polyethylene (LLDPE) grade containing octene-1 copolymer. Exhibits superior stretchable property, high tensile strength, gel-free, cling property and processibility.
It is designed for processing by cast film extrusion.
It is used in stretch wrap and packaging film applications.
YUCLAIR® FT850 complies with REACH, FDA regulations 21 CFR 177.1520 for all food contact and 21 CFR 178.2010 for food packaging substances.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
YUCLAIR® FT850 properties
Films properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Film Thickness | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Spencer | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Secant Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Secant Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Brittleness Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
YUCLAIR® FT850 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cylinder Zone 1 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 2 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 3 Temp. | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Die Width | Visible After Login | Visible After Login | |
| L/S Ratio | Visible After Login | Visible After Login | |
| Screw Diameter | Visible After Login | Visible After Login | |
| Screw speed | Visible After Login | Visible After Login | |