Technical datasheet
Stellarchem AB870EM
Supplied byShanghai Songhan Plastics Technology- Last Updated on Mar 13, 2026
Stellarchem AB870EM by Shanghai Songhan Plastics Technology is a shear dependent thermoplastic polyolefin elastomer (TPE-O). Is a recyclable, soft, non-hygroscopic grade and shows good colorability. Stellarchem AB870EM by Shanghai Songhan Plastics Technology is designed for processing by extrusion and injection molding.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Stellarchem AB870EM properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 300% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, Ultimate | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Stellarchem AB870EM Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Front Barrel Temperature | Visible After Login | Visible After Login | |
| Processing Temperature | Visible After Login | Visible After Login | |
| Screw speed | Visible After Login | Visible After Login | |
Extrusion/Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Temperature | Visible After Login | Visible After Login | |
| Middle Barrel Temperature | Visible After Login | Visible After Login | |
| Rear Barrel Temperature | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Front Barrel Temperature | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |