SABIC® LDPE 2600H0 by SABIC is a low density polyethylene (LDPE) grade. Exhibits very good mechanical properties, low melt flow rate and good processability. It is suitable for processing by blown film extrusion. SABIC® LDPE 2600H0 is used in shrink film for mineral water packaging.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
SABIC® LDPE 2600H0 properties
Films properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blocking Load | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Re-blocking Load | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Coefficient of Friction (COF) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
SABIC® LDPE 2600H0 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Die Gap | Visible After Login | Visible After Login | |
| Die Size | Visible After Login | Visible After Login | |