POLIMOLD TR 70 by Poolkemie is a flexible, two component (A & B), room temperature vulcanizing (RTV) poly-urethane rubber. It is cured with the addition of an appropriate hardener. Offers low linear shrinkage, high dimensional stability and resistance. It is non-toxic, water-proof, free from air bubbles & imperfections and shows no self-release. POLIMOLD TR 70 is used in molds for production of decorative plaster subjects, religious articles, statues, pottery, artistic ceramics, sanitary, precast concrete and garden ornaments.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Availability
Product Status:Visible After Login
POLIMOLD TR 70 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Hardness, Shore | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| De-molding Time | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardening Time | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Mixing Ratio, A & B | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Pot Life, A + B | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity (Density), A + B | 0.0 Visible After Login | Visible After Login | Visible After Login |