Technical datasheet
Venelene® 11PG4
Supplied byPoliolefinas Internacional Polinter- Last Updated on Jun 30, 2022
Venelene® 11PG4 by Poliolefinas Internacional Polinter is a butene linear low density polyethylene (LLDPE) grade. Contains medium level of slip agents and anti-blocking, standard doses of antioxidants and processing aid additives. Exhibits good hot tack, excellent mechanical- and optical properties. Designed for profile and blown film extrusion methods. Venelene® 11PG4 is recommended for general purpose film. Complies with ISO 9001:2008 certification.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Venelene® 11PG4 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Impact Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Puncture Resistance | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Transmittance, Visible | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Toughness | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Venelene® 11PG4 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow Up Ratio (BUR) | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Frost Line Height | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |