FS3011E by Petro Rabigh is a polypropylene homopolymer grade. It exhibits easy processability and films made from this resin exhibits excellent transparency, excellent mechanical & barrier properties. It is insoluble in water and suitable for processing by extrusion. It is recommended for food packaging, printing lamination, adhesive tape, stationary packaging and high speed biaxially oriented polypropylene (BOPP) metalized film. FS3011E complies with EU Regulation (EC) No. 1907/2006 (REACH) and EU Regulation (EC) No. 1272/2008 (CLP).
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
FS3011E properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Auto-ignition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 1% Secant Modulus, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 1% Secant Modulus, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Rockwell R | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
FS3011E Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Extrusion Temperature | Visible After Login | Visible After Login | |
| Stretching Ratio | Visible After Login | Visible After Login | |
| Stretching Ratio | Visible After Login | Visible After Login | |
| Stretching Temperature | Visible After Login | Visible After Login | |