Technical datasheet
AS33L(W)-06
Supplied byMytex Polymers (Mitsubishi Chemical Company)- Last Updated on Sep 3, 2025
AS33L(W)-06 by Mytex Polymers (Mitsubishi Chemical Company) is a rubber modified, compounded polypropylene grade, reinforced with 10% talc. Exhibits outstanding moldability and excellent balance of high stiffness and good impact performance. AS33L(W)-06 is used for painted or mold-in-color automotive exteriors. Complies with ISO/TS 16949:2009.
| Bio Based content | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Availability
Product Status:Visible After Login
AS33L(W)-06 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus, Tangent | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Rockwell R | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT) | 0.0 Visible After Login | Visible After Login | Visible After Login |