Technical datasheet
AN16L-53
Supplied byMytex Polymers (Mitsubishi Chemical Company)- Last Updated on Sep 2, 2025
AN16L-53 by Mytex Polymers (Mitsubishi Chemical Company) is a compounded polypropylene grade. It is used for automotive exteriors and body side molding. Complies with ISO/TS 16949:2009.
| Bio Based content | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Availability
Product Status:Visible After Login
AN16L-53 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus, Tangent | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Rockwell R | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT) | 0.0 Visible After Login | Visible After Login | Visible After Login |