Technical datasheet
ALPERFORM® PE SL FC 0207-14 OA
Supplied byMOCOM Compounds- Last Updated on Dec 26, 2020
ALPERFORM® PE SL FC 0207-14 OA by MOCOM Compounds is low density polyethylene (LDFE) filled with 2% lubricant. It is free from cadmium, lead and diarylide pigments. Exhibits improved sliding and wear property. It has 240 °C upper service temperature limit (short-term). It is suitable for blow molding, extrusion and injection molding applications. ALPERFORM® PE SL FC 0207-14 OA is recommended for food processing industry.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
ALPERFORM® PE SL FC 0207-14 OA properties
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt-Volume Flow Rate | 0.0 Visible After Login | Visible After Login | Visible After Login |
ALPERFORM® PE SL FC 0207-14 OA Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |