Technical datasheet
ALPERFORM® PE SL FC 0205-14 EA
Supplied byMOCOM Compounds- Last Updated on Dec 26, 2020
ALPERFORM® PE SL FC 0205-14 EA by MOCOM Compounds is low density polyethylene (LDFE) filled with lubricants. It has high additive content and is free from cadmium, lead and diarylide pigments, slip agent. It has 260 °C upper service temperature limit (short-term) and migration towards surface. ALPERFORM® PE SL FC 0205-14 EA is suitable for blow molding, extrusion and injection molding applications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
ALPERFORM® PE SL FC 0205-14 EA properties
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
ALPERFORM® PE SL FC 0205-14 EA Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |