TAFMER™ H-5030S by Mitsui Chemicals is a specialty, ethylene based a-olefin elastomer (TPO) grade. Exhibits good impact resistance at low temperatures, low specific gravity, flexibility, elasticity and softness. Provides good filler containability, foamability and crosslinkability. Is odourless, insoluble in water and shows PE miscibility & PP compatibility. TAFMER™ H-5030S meets FDA and EU Directive.
Product family:
Chemical family:
Product Type:
| Color | Clear |
| Appearance | Pellets |
Benefits
US FDA|
Impact Resistance, Low Temp.|
Foamable|
Specialty Grade|
Odor, Low to None|
Crosslinkable|
Food contact approved|
Elasticity, High|
Soft|
Flexibility, Good
Compliance
| Food Contact Approval | Yes |
| Certifications & Compliance | EU Directive |
Applications
Recommended markets
No data available
Availability
Product Status:COMMERCIAL
TAFMER™ H-5030S properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flash Point | > 200 °C | ||
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Clash-Berg Modulus | 4 MPa | At 23°C | ASTM D1043 |
| Elongation at Break | > 1000 % | ASTM D638 | |
| Hardness, Shore A | 73 | ASTM D2240 | |
| Tensile Strength at Break | > 10 MPa | ASTM D638 | |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 870 kg/m3 | ASTM D1505 | |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 5 g/10 min | At 190°C, 2.16 kg | ASTM D1238 |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 11 g/10 min | At 230°C, 2.16 kg | ASTM D1238 |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Brittleness Temperature | < -70 °C | ASTM D746 | |
| Melting Point | 60 °C | MCI Method | |
| Vicat Softening Temperature | < 50 °C | ||