TAFMER™ A-4085S by Mitsui Chemicals is a specialty, ethylene-based a-olefin elastomer (TPO) grade. Provides high speed packing, low crystallinity, transparency, low glass transition temperature and low temperature impact resistance.
- Exhibits low melting point, low heat seal initiation temperature, low young's modulus, softness and flexibility.
- Shows low specific gravity, insolubility in water, elasticity, good filler containability, foamability and crosslinkability.
- Is miscible with polyethylene (PE) and compatible with polypropylene (PP) for adhesion strength control.
- TAFMER™ A-4085S is suitable for processing by blown film and coating extrusion.
- Used in blown PE sealant layers.
- Meets FDA title 21, parts 170 to 189, FCN (food contact notification), EU Directive 2002/72/EC and its amendment 2008/39/EC.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
TAFMER™ A-4085S properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flash Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Clash-Berg Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Brittleness Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |