APEL™ APL6015T by Mitsui Chemicals is a high density, amorphous, norbornene-type cyclo olefin copolymer (COC) resin. Is optically isotropic, non polar and is developed using Ziegler polymerization technology. Offers high glass transition temperature (Tg), exceptional moisture impermeability and impressive gas barrier qualities. Possesses excellent electrical insulation, good melt processability, flowability, good clarity, excellent dimensional stability and transparency. Exhibits outstanding moisture-, chemical-, acid-, alkali-, alcohol- ketone- and ester resistance. Also exhibits resistance to humidity and heat resistance. Provides low coefficient of linear expansion, good thermal, dielectric & electrical behavior, low shrinkage and low moisture absorption. Suitable for processing by injection molding. APEL™ APL6015T is recommended for medical packaging.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
APEL™ APL6015T properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Unnotched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Refractive Index | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Transmittance, Visible | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage, Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, Transverse | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Moisture Permeability | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Glass Transition Temperature (Tg) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Expansion Coefficient | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Expansion Coefficient | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Thermomechanical analysis (TMA) | 0.0 Visible After Login | Visible After Login | Visible After Login |