Technical datasheet
Tefabloc™ TP SD 300 50A
Supplied byMitsubishi Chemical Performance Polymers (MCPP)- Last Updated on Jun 22, 2026
Tefabloc™ TP SD 300 50A by Mitsubishi Chemical Performance Polymers (MCPP) is a thermoplastic elastomer (TPE) grade. Is a food contact acceptable grade, exhibiting high flow, good surface finish, resistance to UV, chemical, detergents, acids and base. Designed for injection molding processing method. Tefabloc™ TP SD 300 50A by Mitsubishi Chemical Performance Polymers (MCPP) is recommended for seals, toys, sporting goods and outdoor applications. Complies with RoHS, EN 71-3 and EU 2000/53/EC.
Product family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Tefabloc™ TP SD 300 50A properties
Aging properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Resistance to Aging | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 20% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Abrasion | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Color Fastness | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Color Fastness | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Service temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
Tefabloc™ TP SD 300 50A Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Front Temperature | Visible After Login | Visible After Login | |
| Injection Rate | Visible After Login | Visible After Login | |
| Middle Temperature | Visible After Login | Visible After Login | |
| Rear Temperature | Visible After Login | Visible After Login | |
| Screw Compression ratio | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |