MARPOL® HDM 509 by Marco Polo International is a non-additive, high density polyethylene (HDPE) grade. Exhibits high stiffness, good processability, low viscosity, good stacking strength, short cycle time and good energy efficiency. Possesses excellent solid state properties and offers good impact resistance & environmental stress-cracking resistance (ESCR). MARPOL® HDM 509 by Marco Polo International is recommended for crates, storage bins, totes, shipping pails, caps and closures.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Availability
Product Status:Visible After Login
MARPOL® HDM 509 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 1% Secant Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore D | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Environmental Stress Cracking Resistance (ESCR) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |