INVISION™ VX 5065UI by LyondellBasell is a thermoplastic vulcanizate (TPV) partially crosslinked ethylene propylene diene monomer (EPDM) rubber. Exhibits high flow, good tear strength, high continuous use temperature, good fluid resistance, low shrinkage, low durometer, easy processability, good weatherability, abrasion resistance and resiliency. Can be processed using injection molding. INVISION™ VX 5065UI by LyondellBasell is recommended for automotive interior applications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
INVISION™ VX 5065UI properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity, Melt | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Maximum Service Temperature, Air | 0.0 Visible After Login | Visible After Login | Visible After Login |