Technical datasheet
Metallocene Polyethylene KN™ KF380
Supplied byJapan Polyethylene- Last Updated on Jan 6, 2025
Metallocene Polyethylene KN™ KF380 by Japan Polyethylene is an ethylene/alpha-olefin copolymer grade. It is produced by high-pressure manufacturing technology using a metallocene catalyst. It offers excellent flexibility, strength, has a low odor and low melting point. It is a plastomer with a uniform composition of both plastic and elastomeric properties. It is processable by film extrusion method. Metallocene Polyethylene KN™ KF380 is used in cast-, sealant-, and stretch film. It is JPN-approved for food applications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Metallocene Polyethylene KN™ KF380 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore D | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Environmental Stress Cracking Resistance (ESCR) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Brittleness Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |