HDPE 010E52 by Indian Oil Corporation is a high density polyethylene (HDPE) grade, produced by nova chemical's sclairtech solution polymerization technology. It exhibits excellent orientation characteristic, low water carry over and superior mechanical properties.
- It is suitable for processing by extrusion.
- It is used in oriented tapes, monofilaments, raffia for woven sacks, wrapping fabrics, tarpaulins, agri shade nets and rachel bags.
- HDPE 010E52 complies with IS:10146-1982, IS: 10141-1982 and FDA: CFR Title 21,177.1520.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
HDPE 010E52 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, Ultimate, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, Ultimate, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
HDPE 010E52 Processing Guidelines
Compression/Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Temperature | Visible After Login | Visible After Login | |
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow Up Ratio (BUR) | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Film thickness | Visible After Login | Visible After Login | |