Terratek® NF3050 by Green Dot Bioplastics is a combination of bamboo fiber and polypropylene grade. This lighter & quieter grade possesses more sustainable life cycle and superior acoustic & thermal insulating properties. It offers stiffness & strength, greater fuel efficiency, cost savings and lower cumulative energy demand. Also, produces damped noise & vibrations, fewer emissions and requires less energy to source. It is suited to lower processing temperatures and faster processing times. It is processed by injection molding. Recommended for furniture, door & trunk liners, under floor pans, floor panels, sports components, skis, surfboards, hockey sticks and automotive parts. Terratek® NF3050 has 15% by weight biomass content.
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Terratek® NF3050 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Terratek® NF3050 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Temperature | Visible After Login | Visible After Login | |
| Moisture Content | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
Injection molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Drying Temperature (Desiccant Dryer) | Visible After Login | Visible After Login | |
| Feed Zone Temperature | Visible After Login | Visible After Login | |
| Front Zone Temperature | Visible After Login | Visible After Login | |
| Middle Zone Temperature | Visible After Login | Visible After Login | |
| Nozzle/Die Temperature | Visible After Login | Visible After Login | |