Formolene® L42022B by Formosa Plastics is a general-purpose linear low density polyethylene butene copolymer grade. It is made using gas-phase technology. Exhibits excellent toughness and strength when drawn down to thin gauges. Designed for film extrusion, co-extrusion, blown and cast film applications. Used for industrial packaging, liners and garment bags. Formolene® L42022B meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Formolene® L42022B properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Auto-ignition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flash Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Film Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Formolene® L42022B Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Adapter Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 1 Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 2 Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 3 Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 4 Temperature | Visible After Login | Visible After Login | |
| Blow Up Ratio (BUR) | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| L/D Ratio | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |