Flontech® FT-GL15-NPA-6 by Flontech is a 85% virgin, high flow, non-flammable polytetrafluoroethylene (PTFE) fluoropolymer grade. It is reinforced with 15% glass and inorganic filler. It is an energy saving, low maintenance and reliable grade. Possesses good stiffness and wear properties, weathering & aging characteristics. Exhibits dimensional stability at high temperature and resistance to high pressure & chemicals such as organic solvents. Flontech® FT-GL15-NPA-6 by Flontech can be processed by automatic, isostatic and compression molding.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Flontech® FT-GL15-NPA-6 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Hardness, Rockwell | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density, Bulk | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Particle Size, Average | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Diametric Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flow-ability | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Flontech® FT-GL15-NPA-6 Processing Guidelines
Compression Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compaction Speed | Visible After Login | Visible After Login | |
| Dwell Time (at Max Pressure, 10 mm height) | Visible After Login | Visible After Login | |
| Moisture Content (Suggested) | Visible After Login | Visible After Login | |
| Mold Tolerance | Visible After Login | Visible After Login | |
| Pre-forming Pressure | Visible After Login | Visible After Login | |
| Pre-forming Speed | Visible After Login | Visible After Login | |
| Pressure Release Time | Visible After Login | Visible After Login | |
| Temperature Range | Visible After Login | Visible After Login | |