TUFLIN™ HS-7098 NT 7 by Dow is linear low density polyethylene (LLDPE) ethylene-hexene copolymer. Contains antiblock (6250 ppm) and slip (1000 ppm) additives. Exhibits high strength and excellent toughness and provides chemical stability. Designed for cast and blown film extrusion applications. Films produced from TUFLIN™ HS-7098 NT 7 by Dow shows superb toughness, high tensile strength and elongation, excellent tear and puncture resistance and are readily heat sealable. Recommended for trash bags, industrial can liners and retail bags. Complies with U.S. FDA 21 CFR 177.1520(c)3.1a (with Restrictions) and EU Directive 2011/65/EU (RoHS).
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
TUFLIN™ HS-7098 NT 7 properties
Films properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Film Thickness - Tested | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density, Base Resin | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
TUFLIN™ HS-7098 NT 7 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow-up Ratio | Visible After Login | Visible After Login | |
| Die Circumference | Visible After Login | Visible After Login | |
| Die Diameter | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Frost Line Height | Visible After Login | Visible After Login | |
| L/D Ratio | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Screw Size | Visible After Login | Visible After Login | |
| Screw speed | Visible After Login | Visible After Login | |
| Secant Modulus | Visible After Login | Visible After Login | |