ENTIRA™ AS SD100 Polymer Modifier by Dow is an extremely hygroscopic ionomer resin used as efficient anti-static additive for surface tension modification. It lowers the static decay time and surface resistivity of polyolefins (LDPE, LLDPE, EVA) and other polymers. It is suitable for processing by extrusion and molding. It is recommended for industrial and packaging applications. It complies with FDA 21 CFR 177.1330(a), TSCA, GB 4806.1-2016, EN 71-3, EU Directive 2012/19/EU (WEEE), EU Directive 2011/65/EU (RoHS) and conforms to CONEG, EU 94/62/EC. Recommended dosage level of ENTIRA™ AS SD100 Polymer Modifier is 10-30%.
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
ENTIRA™ AS SD100 Polymer Modifier properties
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Freezing Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
ENTIRA™ AS SD100 Polymer Modifier Processing Guidelines
Other Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Visible After Login | Visible After Login | ||