CONTINUUM™ DGDA-2420 NT by Dow is a white colored bimodal polyethylene (PE) grade formulated with a U.V. stabilizer. Posesses good toughness at low temperature, high tensile strength & modulus and exhibits high temperature/ pressure performance. Used in natural gas distribution pipes, irrigation and drip tube. Recommended for pipe applications that requires long term hydrostatic strength & slow crack growth resistance and rapid crack propagation. Complies with European Commission Regulation (EU) No 10/2011, REACH, RoHS and Canadian Environmental Protection Agency (CEPA) regulations. Conforms to ASTM D 3350 cell classification PE234373E, ISO PE 2708 and ISO PE 80 pipe industrial standards.
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
CONTINUUM™ DGDA-2420 NT properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 2% Secant Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Resistance to rapid crack propagation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Resistance to rapid crack propagation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Resistance to rapid crack propagation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Resistance to slow crack growth | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Resistance to slow crack growth | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density, Base Resin | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Brittleness Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Thermal Stability | 0.0 Visible After Login | Visible After Login | Visible After Login |