ATTANE™ 4201G by Dow is a white colored, ultra-low-density polyethylene (ULDPE) grade. Possesses good toughness, optical & seal properties, and offers good processability. Is suitable for processing by blown film extrusion. ATTANE™ 4201G is recommended for food packaging applications. Complies with U.S. FDA FCN 424, U.S. FDA-DMF, European Commission Regulation (EU) No 10/2011, REACH, RoHS and Japan Hygienic Olefin and Styrene Plastics Association.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
ATTANE™ 4201G properties
Films properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Film Puncture Resistance | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 2% Secant Modulus, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 2% Secant Modulus, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
ATTANE™ 4201G Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow up ratio | Visible After Login | Visible After Login | |
| Die Diameter | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Frost Line Height | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Screw Size | Visible After Login | Visible After Login | |
| Screw speed | Visible After Login | Visible After Login | |