Technical datasheet
HC20-60S05200
Supplied byChina Hongchao TPE Plastic Material Factory- Last Updated on May 9, 2025
HC20-60S05200 by China Hongchao TPE Plastic Material Factory is a thermoplastic elastomer (TPE) grade. Is suitable for overmolding with acrylonitrile butadiene styrene (ABS), polycarbonate (PC) and styrene acrylonitrile (SAN). HC20-60S05200 complies with ROHS, FDA, PAHS, EN71-3, CRSIA and REACH standards.
Product family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
HC20-60S05200 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Hardness, Shore | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |