Technical datasheet
Dynaflex™ G7680-1 (Natural)
Supplied byAvient (Formerly PolyOne)- Last Updated on Nov 29, 2023
Dynaflex™ G7680-1 (Natural) by Avient (Formerly PolyOne) is a general purpose thermoplastic elastomer (TPE) grade. Provides good flow, rubbery feel, soft touch and allows overmold adhesion to polypropylene. Possesses good colorability, good processability and good processing stability. Is suitable for processing by extrusion and injection molding. Dynaflex™ G7680-1 (Natural) is used in consumer applications, seals, gaskets, overmolding, soft touch applications, flexible grips and sporting goods. Complies with FDA 21 CFR 177.1210 and RoHS.
Product family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Dynaflex™ G7680-1 (Natural) properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Viscosity, Apparent | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity, Apparent | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage, Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Dynaflex™ G7680-1 (Natural) Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Boost Pressure (1st Stage) | Visible After Login | Visible After Login | |
| Front Temperature | Visible After Login | Visible After Login | |
| Hold Pressure (2nd Stage) | Visible After Login | Visible After Login | |
| Hold Time (Thick Part) | Visible After Login | Visible After Login | |
| Hold Time (Thin Part) | Visible After Login | Visible After Login | |
| Injection Speed | Visible After Login | Visible After Login | |
| Middle Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Rear Temperature | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |
| Suggested Max Regrind | Visible After Login | Visible After Login | |