Stanyl® TW241F6 by Envalior is a heat stabilized and lubricated polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber.
It is suitable for processing by injection molding. Possesses high flow, low warpage, low friction, reduced cycle time, easy processability, high toughness, excellent retention of stiffness at higher temperatures (above 100°C) and good electrical properties.
Stanyl® TW241F6 provides excellent heat-, wear-, moisture-, abrasion-, fatigue-, grease-, oil- and creep resistance. Used in automotive and electrical components. Meets ISO 1043 for PA46.
