Return to supplier page
Chroma-chem® UCD® 6173HS by Vibrantz Technologies (formerly Chromaflo) is diketo-pyrrolo-pyrrole orange pigment dispersion for solvent-based urethane coatings. It exhibits grind, high gloss, transparency (organics), high tinting strength value and no bleed or discoloration. It meets the conditions for pigmented, low volatile organic compound (VOC) polyurethanes to replace low-solids thermoplastic acrylics in applications where exterior durability or chemical resistance of the coatings is required. It is formulated at maximum loadings with a rheological profile that makes them resistant to separation by settling or syneresis. It shows light fastness as well as acid- and alkali resistance. It is designed for use in automotive OEM, automotive refinish, industrial maintenance, marine, and protective coatings. The tint strength of Chroma-chem® UCD® 6173HS is controlled by volume to ± 2% to ensure optimal tinting performance in volumetric dispensing equipment. It is compatible with a wide variety of solvents, resins, polymers, reactive diluents, and additives. The shelf life is 3 years. Chroma-chem® UCD® 5643PS by Vibrantz Technologies (formerly Chromaflo) is yellow bismuth vanadate pigment dispersion for silicone-based coatings. It is formulated for use in high-end industrial coatings including, but not limited to, industrial maintenance, marine, and protective coatings. It uses a dry pigment milled in a low-molecular-weight methoxy-functional silicone intermediate with closely controlled color strength and viscosity to permit reproducible color matches by volumetric machine dispensers or weight measurement in the plant. It reduces the amount of color float, shows no bleed or discoloration. The tint strength of this colorant is controlled by volume to ±2% to ensure optimal tinting performance in volumetric dispensing equipment. It is used in reactive formulations based on alkyds, epoxies, polyesters, and hydroxyl-functional acrylics and shows broad compatibility with most aromatic solvents, ketones, esters, chlorinated solvents, and glycol ethers. It exhibits light fastness as well as acid- and alkali resistance. It is compatible with all baking and ambient temperature cured coatings. The shelf life of Chroma-chem® UCD® 5643PS is 3 years. Chroma-chem® UCD® 8030HS by Vibrantz Technologies (formerly Chromaflo) is quinacridone red pigment dispersion for solvent-based urethane coatings. It exhibits grind, high gloss, transparency (organics), high tinting strength value and slight lightfastness. It meets the conditions for pigmented, low volatile organic compound (VOC) polyurethanes to replace low-solids thermoplastic acrylics in applications where exterior durability or chemical resistance of the coatings is required. It is formulated at maximum loadings with a rheological profile that makes them resistant to separation by settling or syneresis. It is designed for use in automotive OEM, automotive refinish, industrial maintenance, marine, and protective coatings. It shows light fastness as well as acid- and alkali resistance. The tint strength of Chroma-chem® UCD® 8030HS is controlled by volume to ± 2% to ensure optimal tinting performance in volumetric dispensing equipment. It is compatible with a wide variety of solvents, resins, polymers, reactive diluents, and additives. The shelf life is 3 years. Chroma-chem® UCD® 5891V by Vibrantz Technologies (formerly Chromaflo) is a transparent red iron oxide pigment dispersion. The colorant vehicle consists of a low-molecular-weight acrylic resin dissolved in propylene glycol monomethyl ether (PM) acetate. The tinting strength of this colorant is controlled to ±2% of the standard. The low molecular weight of its vehicle i.e. non-functional methacrylate polymer helps to ensure full development of pigment strength while providing a rheological profile suited to automated dispensers. It exhibits light fastness as well as acid- and alkali resistance. It is compatible with most coating systems based on acrylic, nitrocellulose, alkyd, polyester, epoxy, epoxy ester, alkyd urea, alkyd melamine, urethane, polyester isocyanate and vinyl. It is also compatible with most aliphatic and aromatic hydrocarbons, esters, ethers, ketones, and reactive diluents. It is thixotropic, which makes it resistant to separation by settling or syneresis. It is suitable for solvent-borne coatings. Chroma-chem® UCD® 5891V is used in automotive OEM, concrete protection, general industrial finishes, marine and protective coatings. It has a shelf life of 3 years. Chroma-chem® UCD® 5721HS by Vibrantz Technologies (formerly Chromaflo) is a yellow-colored, iron oxide pigment dispersion for solvent-based urethane coatings. It exhibits grind, high gloss, transparency (organics), high tinting strength value and no bleed or discoloration. It meets the conditions for pigmented, low volatile organic compound (VOC) polyurethanes to replace low-solids thermoplastic acrylics in applications where exterior durability or chemical resistance of the coatings is required. It is formulated at maximum loadings with a rheological profile that makes them resistant to separation by settling or syneresis. It is designed for use in automotive OEM, automotive refinish, industrial maintenance, marine, and protective coatings. It shows light fastness as well as acid- and alkali resistance. The tint strength of Chroma-chem® UCD® 5721HS is controlled by volume to ± 2% to ensure optimal tinting performance in volumetric dispensing equipment. It is compatible with a wide variety of solvents, resins, polymers, reactive diluents, and additives. The shelf life is 3 years. Chroma-chem® UCD® 1702V by Vibrantz Technologies (formerly Chromaflo) is a conductive carbon black pigment dispersion. The colorant vehicle consists of a low-molecular-weight acrylic resin dissolved in propylene glycol monomethyl ether (PM) acetate. The tinting strength of this colorant is controlled to ±2% of the standard.
<li>The low molecular weight of its vehicle i.e. non-functional methacrylate polymer helps to ensure full development of pigment strength while providing a rheological profile suited to automated dispensers. </li>
<li>It exhibits light fastness as well as acid- and alkali resistance. </li>
<li>It is compatible with most coating systems based on acrylic, nitrocellulose, alkyd, polyester, epoxy, epoxy ester, alkyd urea, alkyd melamine, urethane, polyester isocyanate and vinyl. </li>
<li>It is also compatible with most aliphatic and aromatic hydrocarbons, esters, ethers, ketones, and reactive diluents. </li>
<li>It is thixotropic, which makes it resistant to separation by settling or syneresis. </li>
<li>It is suitable for solvent-borne coatings. </li>
<li>It is used in automotive OEM, concrete protection, general industrial finishes, marine and protective coatings. </li>
<li>Chroma-chem® UCD® 1702V has a shelf life of 3 years. </li></ul> Chroma-chem® UCD® 7949E by Vibrantz Technologies (formerly Chromaflo) is a red-colored, naphthol pigment dispersion. It is compatible with acrylic/PVA emulsions, water-reducible polyester/epoxies, water-soluble alkyds and urethanes as well as with very low VOC and VOC coating systems. It offers light-fastness, acid- and alkali resistance. It has an alkaline pH and is suitable for use in both nonionic as well as anionic paint systems. It provides excellent performance through the ease of incorporation and resistance to flooding/floating as well as flocculation. It exhibits improved water resistance, block resistance and excellent color control for in-plant tinting of architectural coatings. It consists of a low-molecular-weight, automotive type, alkali-soluble acrylic resin dissolved in water that provides excellent pigment wetting. It makes possible high pigment concentrations at relatively low mill base solids levels. The tinting strength of the colorant is controlled to ±2% of the standard. Chroma-chem® UCD® 7949E is used in water-based industrial coatings, aqueous wood coatings, arts and crafts, automotive OEM, concrete protection, general industrial finishes, general OEM, industrial maintenance, integrally colored concrete, marine and protective coatings. It has a shelf life of 3 years. Chroma-chem® UCD® 7975Q by Vibrantz Technologies (formerly Chromaflo) is a fast-red monoazo pigment dispersion, based on 2-butoxyethanol and alkali-soluble acrylic resin. The co-solvent (2-butoxyethanol) offers the benefit of excellent package stability, product deaeration and improved coalescence. It shows no bleed acid/alkali pigment resistance but slightly tinted lightfastness. It provides excellent grind, high gloss and in-can stability. It offers low VOC level, rheological characteristics and extraordinary stability to the colorant (resistance to flocculation, settling and syneresis). It is compatible with coating systems based on acrylic, acrylic/PVA emulsions, water reducible polyester/epoxy, water-soluble alkyd and urethane. Chroma-chem® UCD® 7975Q is used in alkaline water-based coatings including automotive interior OEM, industrial maintenance, marine, wood and protective coatings. It has a shelf-life of 3 years. Chroma-chem® UCD® 8443PS by Vibrantz Technologies (formerly Chromaflo) is quinacridone violet pigment dispersion for silicone-based coatings. It is formulated for use in high-end industrial coatings including, but not limited to, industrial maintenance, marine, and protective coatings. It uses a dry pigment milled in a low-molecular-weight methoxy-functional silicone intermediate with closely controlled color strength and viscosity to permit reproducible color matches by volumetric machine dispensers or weight measurement in the plant. It is compatible with all baking and ambient temperature cured coatings. The use of Chroma-chem® UCD® 8443PS reduces the amount of color float. It exhibits light fastness as well as acid- and alkali resistance. The tint strength of this colorant is controlled by volume to ±2% to ensure optimal tinting performance in volumetric dispensing equipment. It is used in reactive formulations based on alkyds, epoxies, polyesters, and hydroxyl-functional acrylics and shows broad compatibility with most aromatic solvents, ketones, esters, chlorinated solvents, and glycol ethers. The shelf life is 3 years. Chroma-chem® UCD® 1625V by Vibrantz Technologies (formerly Chromaflo) is a lampblack pigment dispersion. The colorant vehicle consists of a low-molecular-weight acrylic resin dissolved in propylene glycol monomethyl ether (PM) acetate. The low molecular weight of its vehicle i.e. non-functional methacrylate polymer helps to ensure full development of pigment strength while providing a rheological profile suited to automated dispensers. <br> <ul style="padding-left: 40px;">
<li>The tinting strength of this colorant is controlled to ±2% of the standard. It exhibits light fastness as well as acid- and alkali resistance. </li>
<li>It is compatible with most coating systems based on acrylic, nitrocellulose, alkyd, polyester, epoxy, epoxy ester, alkyd urea, alkyd melamine, urethane, polyester isocyanate and vinyl. </li>
<li>It is also compatible with most aliphatic and aromatic hydrocarbons, esters, ethers, ketones, and reactive diluents. </li>
<li>It is thixotropic, which makes it resistant to separation by settling or syneresis. </li>
<li>It is suitable for solvent-borne coatings. </li>
<li>It is used in automotive OEM, concrete protection, general industrial finishes, marine and protective coatings. </li>
<li>Chroma-chem® UCD® 1625V has a shelf life of 3 years. </li></ul>
Chroma-Chem® UCD®
Coating ingredients supplied by Vibrantz Technologies (formerly Chromaflo)