Return to supplier page
CYLINK® MBA Monomer (N,N’-Methylene Bisacrylamide) by Syensqo is an effective and versatile bi-functional methacrylate monomer. It acts as a crosslinking agent. CYLINK® MBA Monomer (N,N’-Methylene Bisacrylamide) is used in architectural coatings. CYLINK® DOM (Dioctyl Maleate) by Syensqo is a reactive crosslinking and plasticizing monomer that may be copolymerized with other monomers such as styrene, vinyl acetate, EVA, PVC, and acrylates providing elasticity and flexibility to the films. This internally plasticized copolymer films are not subject to embrittlement due to evaporation and are highly resistant to humidity and ultra-violet light. Used as a comonomer in emulsion polymerization for the production of soft polymers, latex for paints and paper coating applications. CYLINK® DOM (Dioctyl Maleate) complies with all provisions of the Toxic Substances Control Act, 15 U.S.C. CYLINK® 2000 by Syensqo is tris(Alkoxycarbonylamino) triazine. Used in automotive topcoats, coil coatings, exterior can coatings, electrodeposition coatings, solvent- and water-borne finishes. Offers very good environmental etch resistance. Provides very good exterior durability. CYLINK® 2000 exhibits low equivalent weight/high efficiency and low human toxicity. CYLINK® NH8 Wet Adhesion Monomer by Syensqo is a clear, reddish-brown, odorless proprietary functional monomer. It provides outstanding wet adhesion and wet scrub resistance at levels as low as 0.5% (phm). Does not homopolymerize easily during emulsion polymerization. 2% concentrates of CYLINK® NH8 Wet Adhesion Monomer can be prepared and diluted with virgin latexes to achieve desired degree of wet adhesion performance. Readily copolymerizable with acrylic, styrene-acrylic, and vinyl acrylic latex paints. CYLINK® TAC by Syensqo is Tri-allyl cyanurate. It is a cost-effective, tri-functional, internal crosslinking monomer capable of forming homo-polymers and copolymers. Exhibits scrub resistance, high-impact resistance and wet strength. Imparts improved heat- & solvent resistance, improved electrical properties and hardness. Crosslinkable with polyesters, epoxies, PVC and polyolefins. CYLINK® TAC is suitable for use in both emulsion and solvent polymerizations. Applications include wire and cable coatings.
CYLINK®
Coating ingredients supplied by Syensqo
5 Products match your search
CYLINK® MBA Monomer (N,N’-Methylene Bisacrylamide)
by Syensqo
CYLINK® DOM (Dioctyl Maleate)
by Syensqo
- Sustainable option
CYLINK® 2000
by Syensqo
CYLINK® NH8 Wet Adhesion Monomer
by Syensqo
CYLINK® TAC
by Syensqo
- DISCONTINUED
Showper page