Rid-O-Foam®

Coating ingredients supplied by Pflaumer Brothers

2 Products match your search

Rid-O-Foam® 4050

by Pflaumer Brothers

It acts as an anti-crater, flow and leveling agent. It is a high performance air-release agent for solvent-based polyurethanes. Usage level is 0.1% to 0.3% based on the weight of the polyol components. In addition higher level of dosage is required for thicker film applications. It is found not to affect inter-coat adhesion. Can be used with polyester, polyether, polyacrylate and other hydroxylated polyols. Mainly recommended for primers, finishes and automotive applications.

DISCONTINUED

See the product

Rid-O-Foam® A-4

by Pflaumer Brothers

It acts as a defoamer. And is 100% active designed to provide fast-acting and long-lasting foam control in a wide variety of water-based systems as well as in wide range of temperature and ph. Normally used at a level ranging between 0.4 & 5 pounds per hundred gallons of latex paint and incorporated at a level, starting at 0.01% based on total weight, during the polymerization reaction or during the stripping process. Foam control in a resin emulsion system is achieved at a level ranging between 0.01% to 1.0% based on total volume. It has demonstrated compatibility with acrylic, vinyl-acrylic, polyvinyl acetate, and styrene-butadiene binders. It does not affect color acceptance or development. It is ccompatible in a wide variety of latex system and is effective in high gloss systems. Mainly applicable in paint stripping.