Return to supplier page
HALOX® 680 by ICL is a VOC-free, non-flammable, smart release anticorrosive pigment which releases a heterocyclic organic corrosion inhibitor from an
organic matrix that adsorbs on the metal surface and forms a protective film. It offers decreased cathodic delamination (undercutting) and improves cut edge protection.<br>
<ul style="padding-left: 40px;"><li>It is jet milled grade that provides increased intercoat coating adhesion and prevents osmotic blistering. It reduces cost by lowering zinc phosphate loading.</li>
<li>It acts synergistically with other corrosion inhibitors such as zinc phosphate, Z-PLEX 111, SZP-391, HALOX® 430 and Zn-free phosphates.</li>
<li>It can be formulated into solvent-based, high solid-, and powder coatings.</li>
<li>It is suitable for solvent-based primers & DTM alkyds, acrylics, water-based epoxies and urethanes, high solids and 100% solids, semi-gloss paints and coil coatings.</li>
<li>The dosage level of HALOX® 680 as a stand-alone corrosion inhibitor or as an adhesion promoter is 1-2% based on total formula weight (TFW).</li>
<li>When used in synergy with standard zinc phosphate the loading level of the product is typically 0.5-4% on total formula weight (TFW).</li></ul> HALOX® 580 by ICL is a low-VOC, bio-based liquid corrosion inhibitor. It is cost-effective and provides improved adhesion, water resistance with synergistic benefits. It is non-flammable and shows good shelf stability.<br>
<ul style="padding-left: 40px;"><li> It offers minimal gloss impact and is perfect for eco-label compliant coatings.</li>
<li> It is sustainable, clean labeled, heavy metal-free, APEO-free, HAPS-free and non-hazardous for shipping and transportation.</li>
<li>It can be easily post added or added in the letdown stage.</li>
<li> It is suitable for thin-film coatings, acrylic emulsions, epoxies, water reducible alkyds, polyurethanes, alkyds and urethane alkyds.</li>
<li> HALOX® 580 is used for protection of waterborne clear coats, solvent-based, high solids, 100% solids paints, primer and direct-to-metal (DTM) coatings.</li>
<li> Recommended dosage level is 0.5-3.0% based on total formula weight.</li></ul> HALOX® FLASH-X® 152 by ICL is an ultra-low-VOC flash rust inhibitor based on anodic passivating oxyanion. It is effective in preventing general flash rusting and weld seam corrosion. It is highly effective at relatively low loading levels as compared to other high and low VOC flash rust inhibitors. <br>
<ul style="padding-left: 40px;"><li>It is compatible with a variety of water-based resins without causing film sensitivity or package stability problems which can occur with other flash rust additives. </li>
<li>It is heavy metal-, APEO-, and HAPS free.</li>
<li>HALOX® FLASH-X® 152 is designed for industrial and architectural paints. </li>
<li>Recommended dosage level is 0.5-1.5% to stop flash rust and 1.0-2% to stop galvanic corrosion.</li></ul> HALOX® SZP-391 by ICL is a non-refractive, most efficient and versatile corrosion inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters and silicones.<br>
<ul style="padding-left: 40px;"><li>It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers and acrylics.</li>
<li>It is designed for use in high acid value resins, latexes, catalyzed baking systems and vinylidene chloride latexes.</li>
<li>The fine particle size and low oil absorption of HALOX® SZP-391 makes it the pigment of choice in thin film applications (<1 mil or 25 microns).</li>
<li>The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings.</li>
<li>It has a shelf life of 36 months.</li></ul> HALOX® Z-PLEX 111 by ICL is a highly versatile and economical corrosion inhibiting pigment. It is zinc phosphate complex designed to compete head-to-head with standard zinc phosphate pigments. It is a white, non-refractive grade used in protective coating systems.<br>
<ul style="padding-left: 40px;"><li>It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyds and water-based epoxies, polyurethanes & polyurethane dispersions.</li>
<li>HALOX® Z-PLEX 111 has a shelf life of 36 months.</li></ul> HALOX® SZP-395 by ICL is a white, non-refractive, efficient and versatile corrosion inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. <br>
<ul style="padding-left: 40px;"><li>It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes.</li>
<li>The fine particle size and low oil absorption of HALOX® SZP-395 makes it the pigment of choice in thin-film applications (<1 mil or 25 µm).</li>
<li>The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight.</li>
<li>It has a shelf life of 36 months.</li></ul> HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane dispersions (PUD) applied to a variety of wood species for example, redwood, merbau, and oak.<br>
<ul style="padding-left: 40px;"><li>It offers superior performance without the need for Zn<sup>2+</sup> cations thus conforming to European ecolabel requirements.</li>
<li> HALOX® XTAIN® L-47 provides similar efficiency as its predecessor HALOX® XTAIN® L-44.</li>
<li> Recommended dosage level is 1-3% based on total formula weight.</li></ul> HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high gloss systems and does not detract from gloss.<br>
<ul style="padding-left: 40px;"><li>It is added to water jet-blasting solutions to provide temporary protection prior to applying the protective coating.</li>
<li>HALOX® FLASH-X® 330 is easy to use and can be incorporated at any stage of coating manufacture.</li>
<li>It can also be easily and effectively post added to any coating system.</li>
<li>The dosage level for flash-rusting application is 0.5-2% and for in-can rusting is 1.5-2.5%.</li>
<li>It has a shelf life of 24 months.</li></ul> HALOX® 570 by ICL is an organic corrosion inhibitor designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. <br>
<ul style="padding-left: 40px;"><li>
It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV cured systems. </li>
<li>It can be used in both water-based primers and direct-to-metal topcoats. </li>
<li>It has minimal effect on gloss reduction in direct-to-metal coatings. </li>
<li>HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2 pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane.</li>
<li>It is recommended at 1–4% (as a 30% solution) based on total formulation solids. </li>
<li>It has a shelf life of 36 months.</li></ul> HALOX® 700 by ICL is a white, non-refractive, corrosion inhibiting pigment used in protective coatings. The combination of zinc and aluminum phosphates provides extended protection in solvent-based and water-based epoxy and urethane coatings. <br>
<ul style="padding-left: 40px;"><li>
For alkyd and acrylic coatings, HALOX Organic Corrosion Inhibitors are recommended for use in combination with HALOX 700. </li>
<li>The dosage level of HALOX® 700 is 5-12% based on total formula weight. </li>
<li>It has a shelf life of 36 months. </li></ul>
HALOX®
Coating ingredients supplied by ICL
38 Products match your search
HALOX® 680
by ICL
- Sustainable option
- Original documents
HALOX® 580
by ICL
- Sustainable option
- Original documents
HALOX® FLASH-X® 152
by ICL
- Sustainable option
- Original documents
HALOX® SZP-391
by ICL
- Original documents
HALOX® Z-PLEX 111
by ICL
- Original documents
HALOX® SZP-395
by ICL
- Original documents
HALOX® XTAIN® L-47
by ICL
- Original documents
HALOX® FLASH-X® 330
by ICL
- Original documents
HALOX® 570
by ICL
- Sustainable option
- Original documents
HALOX® 700
by ICL
- Original documents