Return to supplier page
Ancamine® 2868 by Evonik is a modified phenol-free, cyclic polyamine intended for use as an accelerator for epoxy formulations.<br><ul style="padding-left: 40px;"><li>It is used as a co‑curing agent with polyamides, amidoamines, and cycloaliphatic amine curing agents to offer ultra-rapid thin film cure.</li><li> It maintains key physical and barrier properties, surface appearance, and corrosion protection.</li><li> It offers low color, high carbamation resistance and good blush resistance.</li><li> It is recommended dosage level is 60 phr with bisphenol-A based epoxy resin (EEW=190).<li>Ancamine® 2868 is recommended for industrial maintenance, protective coatings, and civil engineering applications. </li><li> It has shelf life of 24 months.</li> ANCAMINE® 2873 by Evonik is an ultra-low-emission (ULE) curing agent developed for high-solids, low-VOC epoxy coatings. It offers fast, blush-free curing in winters, extended pot life, and rapid property development at ambient and low temperatures down to 5°C. It provides excellent surface appearance, strong early water resistance, good corrosion protection, and excellent adhesion even on marginally prepared substrates.<br>
<ul style="padding-left: 40px;"><li>Its low viscosity and robust reactivity profile enables smooth spray application and clean film formation. </li>
<li>It supports efficient application and quicker return to service in challenging environments.</li>
<li>ANCAMINE® 2873 is used in protective-, maintenance- and marine coatings as well as in corrosion protection systems. </li>
<li>It helps meet increasingly stringent regulatory and sustainability requirements while improving environmental, health, and safety performance.</li></ul> ANCAMINE® 2875 by Evonik is a modified polyamine curing agent developed for diluted liquid epoxy resins, suitable for both ambient and low-temperature applications. <br>
<ul style="padding-left: 40px;"><li>
It supports curing at low temperatures, allows a fast return to service, and offers extended working time. </li>
<li>It is free from solvents, alkyl phenol derivatives, and benzyl alcohol.</li>
<li>It suitable for low-emission, protective, pigmented and clear floor coatings. </li>
<li>It also provides strong moisture vapor barrier performance and, helping to limit moisture vapor transmission through concrete floors. </li>
<li>It reduces the risk of flooring failure. </li>
<li>It meets ASTM F3010 requirements. </li>
<li>It has a shelf life of at least 24 months. </li></ul> ANCAMINE® 2836 by Evonik is a high functional Mannich based curing agent designed for use in two part epoxy formulations. It enables to formulate epoxy systems with high glass transition temperature (Tg) and it can also be used as a co-curing agent to boost the Tg values of other cycloaliphatic curing agents. It provides a good balance of working life and high chemical resistance.<br>
<ul style="padding-left: 40px;"><li> It provides a good balance of working life and high chemical resistance.</li>
<li> It is suitable for formulating chemically resistant coatings including application that might require high chemical resistance at elevated temperatures, linings and floorings.</li>
<li> Recommended dosage level of ANCAMINE® 2836 is 29 phr with bisphenol-A based epoxy resin (EEW=190).</li>
<li> It has a shelf life of 24 months.</li></ul> ANCAMINE® 2792 by Evonik is a high performance, low viscosity modified polyamine-based curing agent. It is intended for use with liquid epoxy resin and has good flexibility, good adhesion on substrates. ANCAMINE® 2792 has excellent anti-corrosive performances and suitably used for surface tolerant protective coatings. ANCAMINE® 2638 by Evonik is a modified aliphatic amine designed for use with liquid epoxy resins in two-package formulations.<br>
<ul style="padding-left: 40px;"><li> Exhibits low color, thermal shock resistance and high toughness.</li>
<li> It is used in industrial-, marine- and protective coatings.</li>
<li> Recommended use level at EEW=190 is 50 phr.</li>
<li> ANCAMINE® 2638 has a shelf life of 24 months.</li></ul> ANCAMINE® 2442 by Evonik is modified polyamine. Acts as a latent curing agent for one-component epoxy formulations. Provides a good balance of low temperature activation, good shelf stability and high glass transition temperature. Offers very good green strength development and very good reactivity. Used for powder coatings. Also used for applications requiring latency and high performance. Recommended use level of ANCAMINE® 2442 is 20 phr (EEW=190). It has a shelf life of 24 months. ANCAMINE® 2859 by Evonik acts as an epoxy curing agent. It does not contain salicylic acid and boasts a more future-proof EHS-friendly labeling. It not only offers faster cure speeds but also delivers excellent surface appearance and carbamation resistance at 5°C. It offers faster cure speeds but also delivers excellent surface appearance. It demonstrates fast curing at both ambient and lower temperatures as demonstrated by thin film set time (TFST) measurements. It is ideal for applications industrial flooring. ANCAMINE® 2859 film surface shows no defects or discoloration in the water spot test ANCAMINE® 2858 by Evonik is a modified cycloaliphatic polyamine intended for use as curing agent for liquid epoxy resin. It offers a well-balanced combination of chemical resistance and surface appearance properties. <br>
<ul style="padding-left: 40px;"> <li> It is particularly suited for use in warmer climates due to its long working pot life. </li>
<li>It is effective in various applications such as industrial flooring, screeds, primers, grouts, trowel floors, high solids coatings and secondary containment systems. </li>
<li>This product is ideal for applications that demand strong chemical resistance and excellent surface properties. </li>
<li>Recommended dosage level of ANCAMINE® 2858 is 50 phr with bisphenol-A based epoxy resin (EEW 190). </li>
<li>It has a shelf life of 24 months. </li> ANCAMINE® 2849 by Evonik is a curing agent based on modified aliphatic amine designed for use with bisphenol F and epoxy novolac resins. It provides outstanding protection against sulfuric acid and crude oil. <br>
<ul style="padding-left: 40px;"> <li> It provides good blush resistance. </li>
<li>Designed for use in coating applications that require resistance to acids in industrial coating applications like interior tank linings, secondary containment coatings and wastewater linings. </li>
<li>Recommended dosage level of ANCAMINE® 2849 is 45 phr with bisphenol-A based epoxy resin (EEW 190). </li>
<li>It has a shelf life of 24 months. </li>
ANCAMINE®
Coating ingredients supplied by Evonik
ANCAMINE® curing agents by Evonik are based on modified aliphatic and cycloaliphatic polyamines. They are used in solvent-free and high-solids coatings.
Key features of ANCAMINE® series include:
- Resistance to amine blush and water spotting
- Excellent color and color stability
- Good adhesion and film properties (such as gloss)
- Excellent pot-life and viscosity
- Good cure speed and chemical resistance
- Compatible with epoxy and amide resins
134 Products match your search
Ancamine® 2868
by Evonik
- Recently launched
ANCAMINE® 2873
by Evonik
- Recently launched
- Sustainable option
ANCAMINE® 2875
by Evonik
- Recently launched
- Sustainable option