Catacure

Coating ingredients supplied by Elementis

4 Products match your search

Catacure TIN-22

by Elementis

Catacure TIN-22 by Elementis is a high efficiency, organo-tin compound-based catalyst. It is catalyzed the reaction between isocyanates and alcohols and esterification as well as transesterification reaction.<br> <ul style="padding-left: 40px;"><li>It is used in solvent-based two-component & moisture curing polyurethane coatings and inks.</li> <li>Recommended dosage level is 0.005-0.300% based on solid resin.</li> <li>Catacure TIN-22 has a shelf life of 18 months.</li></ul>

See the product

Catacure KL

by Elementis

Catacure KL by Elementis is a curing catalyst for polyurethane coatings. It is a solution of organo-tin compound. It is used in two-component and moisture cure polyurethane coating to accelerate reaction of isocyanate and active hydrogen.<br> <ul style="padding-left: 40px;"><li>It is combination of Catacure KL and amine can obtain even faster curing in certain polyurethane systems.</li> <li>Recommended dosage level is 0.02-0.1% based on total formulation.</li> <li>It has a shelf life of 18 months.</li></ul>

See the product

Catacure KC

by Elementis

Catacure KC by Elementis is a blocked curing catalyst used in baking paints especially for fully alkylated melamines which need strong catalyst. It can either lower baking temperature or shorten baking time. When added in baking paint, Catacure KC, compared to unblocked P-TSA, shows better storage stability, lower viscosity, less gelation tendency.<br> <ul style="padding-left: 40px;"><li>It exhibits lower deblocking temperature(130-150°C), i.e., lower baking temperature compared to other amine salts of P-TSA.</li> <li>It shows better over-baking yellowing resistance than other amine salt.</li> <li>It is used in solvent based and waterborne acrylic/ HMMM paints and inks.</li> <li>Recommended dosage level is 1-4% based on total formulation.</li> <li>Catacure KC has a shelf life of 18 months.</li></ul>

See the product

Catacure KB

by Elementis

Catacure KB by Elementis is a acidic polymer-based curing catalyst used in butylated melamine baking paint. It demonstrates catalytic function when baking temperature is higher than 70°C. It shows good storage stability without causing gelling. Due to its polymeric composition, it will not migrate, which is often found with conventional sulfonic acid, from paint film.<br> <ul style="padding-left: 40px;"><li>When using Catacure KB, same paint film property is achieved by either lowering baking temperature at same baking time, or reducing baking time at same baking temperature.</li> <li>It saves operation cost and speeds up production rate.</li> <li>Recommended dosage level is 1-3%.</li> <li>It has a shelf life of 18 months.</li></ul>

See the product

Showper page