ACCUREL® Si 752 by Evonik acts as a mold release agent and lubricant for HDPE-based applications. It reduces the coefficient of friction. It can be incorporated using gravimetric or volumetric dosing equipment or by physical blending with the base resin. Its pre-dispersion in the porous carrier supports a homogeneous distribution in the finished product even at low addition levels. Recommended dosage level is 0.2-0.4 % for mold release and 0.5-1.5 % for slip applications. Complies with EU Regulation EC 10/2011, FDA 21 CFR 177.1520 and REACH Regulation (EC) No. 1907/2006. It is listed with GB 9685-2016 for coatings with food contact. Shelf life of ACCUREL® Si 752 is 12 months.
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Availability
Product Status:Visible After Login
ACCUREL® Si 752 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Additive Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density, Bulk | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Softening Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |