Hydrophobing Agents for Coatings and Inks

Flexipel™ Q-50 by Innovative Chemical Technologies is a water-based, stabilized cationic silane emulsion that delivers a durable, invisible coating under ambient cure conditions. It provides antistatic properties, lubricity, water repellency and stain resistance. It offers durable scratch resistant coating for glass, mirrors, tile and ceramics. Flexipel™ Q-50 has a shelf life of 6 months.

Flexipel™ SR-95HF by Innovative Chemical Technologies is a functionalized dispersant polymer has built-in detergent, wetting, and haze-free characteristics for use as an additive in bath & shower cleaners, hard surface cleaners, and vehicle cleaners such as one-step self-dry, no rinse, touchless wash. It enhances cleaning and leaves behind a durable barrier which resists the insults of hard water, soap scum, and particulate soils. Recommended dosage level is 0.25-10% by weight of solution. Flexipel™ SR-95HF has a shelf life of 12 months.

Flexipel™ Q-1000 by Innovative Chemical Technologies is a concentrated, polar solvent-based reactive silane that delivers a durable, invisible coating under ambient cure conditions. It provides antistatic properties, lubricity, water repellency and stain resistance. It offers durable scratch resistant coating for glass, mirrors, tile and ceramics. Flexipel™ Q-1000 has a shelf life of 12 months.

Flexipel™ SR-80 by Innovative Chemical Technologies is an aqueous polymer used to impart a hydrophilic and easy clean surface which resists soap scum build-up, hard water deposits and oily soil. Provides spot-free drying in hard surface cleaners and treatments as well as for vehicle care including DIY applications with rinse. It functions in neutral, acid, alkaline and peroxide environments. Used in exterior automotive applications. It is acceptable for aerosol applicationsn and is compatible with nonionic, anionic, amphoteric and some cationic materials. Recommended dosage level is 0.05-1% by weight of solution. Flexipel™ SR-80 has a shelf life of 12 months.

VARIPHOB® AC 3030 by CHT Group is a high-performance silicone and wax-based hydrophobic agent for the protection of substrates. It is an organomodified polysiloxane. It imparts a hydrophobic effect to end products while allowing optimum water vapor permeability. It is designed for aqueous systems. It is open to diffusion & emulsion and increases the surface hydrophobicity. It is free from mineral oil, fluorine, organic solvents and silicone cycles (D4/D5/D6).

• It has low tendency to dirt pick-up and improves early water resistance.
• Provides high durability in the final coating, high compatibility and no washout effect.
• It in non-ionic, non-yellowing and protects against wetness.
• It reduces the capillary water absorption and re-drying time.
• It is a self-crosslinking, soft silicone resin and stable to silicate.
• It is an innovative combination of breathability and reduced water absorption.
• VARIPHOB® AC 3030 is suitable for let-down stage, dispersion paints, plasters, exterior-, interior paints, plasters, primers and topcoats.

DOWSIL™ 87 Additive distributed by DKSH is a solvent- and APEO-free, silicone-based additive for hydrophobing waterborne decorative coatings. It shows good compatibility with acrylic resins. It is suitable for formulation of waterborne decorative coatings to improve water repellency.

• It has minimal effect on water vapor permeability and high dirt pickup resistance.
• It is used in metal protective coatings, can, coil and industrial coatings, and construction applications.
• Recommended dosage level is 1-5%.
• DOWSIL™ 87 Additive has a shelf life of 24 months from date of production.
• It is available in APAC region (New Zealand, Australia, Malaysia, Vietnam, Singapore, Cambodia, Myanmar).

TEGO® Phobe 1500 N distributed by DKSH is a product that produces hydrophobing and very pronounced beading effect. Also suitable for water-, solvent borne formulations. Provides very good water resistance. It is used in architectural paints, wood-, can-, coil-, decorative-, general industrial coatings and printing inks.

• Recommended usage level is 1.0-8.0%.
• It has a shelf life of 12 months.
• TEGO® Phobe 1500 N is available in APAC region (Indonesia, Myanmar, Thailand, and Philippines).

TEGO® Phobe 6510 distributed by DKSH is a polysiloxane resin /silane blend for waterborne impregnations and primers, applicable on alkaline substrates. It provides deep substrate penetration and good water beading effect. It is used in architectural paints, wood-, can-, coil-, decorative-, general industrial coatings and printing inks.

• Recommended usage level is 5.0-12.0%.
• It has a shelf life of 12 months.
• TEGO® Phobe 6510 is available in APAC region (Indonesia, Myanmar, Thailand, and Philippines).

TEGO® Phobe 6600 distributed by DKSH is a formulation of a polysiloxane resin / silane blend for waterborne impregnations and primers. It is applicable on neutral to slightly alkaline substrates. Provides a good water beading effect. It is used in architectural paints, wood-, can-, coil-, decorative-, general industrial coatings and printing inks.

• Recommended usage level is 5.0-25.0%.
• It has a shelf life of 12 months.
• TEGO® Phobe 6600 is available in APAC region (Indonesia, Myanmar, Thailand, and Philippines).

DOWSIL™ HV 496 Emulsion distributed by DKSH acts as a hydrophobic agent. It is a high molecular weight, silanol functional siloxane polymer emulsion with low cyclic siloxane content. It displays the benefits of improved tear strength on woven fabric, improved crease resistance, improved abrasion resistance, improved stretch recovery of knitted garments, fabric whiteness retention, excellent thermal stability, easy application, excellent dilution stability and great surface wetting characteristics.

• It is great to use in textiles, leather, auto/home care and mineral wool/fiberglass hydrophobing applications.
• It is suitable for construction paints and coatings.
• DOWSIL™ HV 496 Emulsion has a shelf life of 12 months.
• It is available in APAC region (New Zealand, Australia, Vietnam, Singapore, Cambodia, Myanmar, Malaysia).