Arkema, AkzoNobel and BASF collaborate to lower CF of architectural powder coatings
Last update on Sep 11, 2025
The carbon footprint of superdurable architectural powder coatings supplied by AkzoNobel’s Interpon brand is up to 40% lower, thanks to an ongoing value chain partnership with Arkema and BASF. It means the superdurable Interpon D range can now make an even bigger impact in helping to reduce embodied carbon over the whole lifecycle of a building.
Transformation with bio-attributed raw materials
The improvement has been made possible through a combination of using supplier-specific product carbon footprint (PCF) data and sourcing bio-attributed raw materials. Previously, carbon footprint calculations were made on the basis of generic industry averages for polyester resins. By using supplier-specific PCF data instead, these calculations are now more accurate, as they better reflect important variables, such as investments made in process efficiencies and the use of renewable electricity by the partners involved.
Further benefits are gained by using bio-attributed raw materials from BASF which have a PCF of zero. Arkema transforms these inputs to reduce the carbon footprint of its high durability powder resins which AkzoNobel incorporates in standard and low-temperature cure superdurable powder coatings.
The color collections and Low-E architectural powder coatings produced by Interpon in Europe - all of which are superdurable - now use reduced emission bio-attributed material. This means they can play a major role in helping to lower the carbon footprint of the built environment.
Strategic partnership for sustainable transition
The three partners have published an industry case study to offer further insights into the transition to lower carbon footprint powder coatings, including details of the methodology and calculations used.
“This collaboration is a major step forward for the paints and coatings industry. Our customers require solutions that support their environmental goals and green building certification. By working across the value chain, we’re taking meaningful steps towards carbon footprint reduction, while also demonstrating our unwavering commitment to sustainability,” said Jeff Jirak, director of AkzoNobel’s Powder Coatings business.
“This initiative reflects our commitment to offering more sustainable solutions through innovation and collaboration. Our vision is to be the preferred partner for sustainable intermediates for our customers. By supplying neopentyl glycol (NPG) in a biomass-balanced version manufactured with renewable electricity (NPG ZeroPCF), we’re supporting our value chain partners in advancing their sustainability objectives while at the same time contributing to achieving our own vision,” said Vasilios Galanos, senior vice-president, Intermediates Europe, BASF.
“By leveraging renewable bio-attribution via mass balance and sustainable innovations, we enable continuous improvement in low temperature cure and higher durability solutions. Even more is achievable in terms of mainstream decarbonization along the value chain. Together, we’re developing next generation powder coating solutions with lower carbon emissions for the building and construction sector,” said Richard Jenkins, senior vice-president, Coating Solutions and member of the Executive Committee at Arkema.
The three parties are planning more collaboration across the value chain and welcome a broader network of partners to accelerate the paint and coatings industry’s transformation towards a more sustainable future.