Coating ingredients for Metal Coatings

SETALUX® 57-1587 by allnex is a hydroxyl-functional acrylic resin for 2K applications. It offers fast cure, long pot-life and low VOC formulation potential (2.1-3.5 lb/gal). It provides very good exterior durability, UV- and chemical resistance, and excellent overall performance properties.

• It is designed for topcoats, primers and single coat enamels for vehicle refinish and industrial applications.
• SETALUX® 57-1587 is a modifier for both acrylic and polyester urethane systems.
• It is suitable for maintenance-, marine-, metal- and plastic coatings.
• It has a shelf life of 3 years at temperatures up to 100°F.

SETALUX® 17-1611 by allnex is hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, it has excellent exterior durability.

• It provides good flexibility and chemical resistance properties.
• It is suitable for industrial high performance coatings for wood, metal or plastics and fast drying industrial primers and topcoats.
• Recommended for topcoats for transportation, chemical maintenance or construction equipment and spot repair clearcoats for car refinishes.
• SETALUX® 17-1611 has a shelf life of 3 years.

DEGALAN® LP 64/12 distributed by DKSH is a versatile binder methacrylates. It exhibits weather- and chemical resistance and lightfastness.

• It is used in UV-printing inks, aerosol, marine & container coatings, primers, impregnations, exterior house-, masonry- and road marking paints.
It is blendable with alcohol and possesses good adhesion to various substrates such as plastics, paper, textiles and metal.
• It is also designed for penetrating primers, concrete- and protective coatings.
• It is compatible with most PVC copolymers, PS, PC, PMMA, ABS, ester-soluble nitrocellulose, chlorinated rubber, plasticizer, cellulose acetobutyrates/ acetopropionate and partly compatible with alkyd and epoxy ester resins.
• It has a shelf life of 5 years.
• DEGALAN® LP 64/12 is available in Canada.

EBECRYL® 436 by allnex is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA). It exhibits good lithographic behavior, pigment wetting properties and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL® 436 display good adhesion to metals, plastics and paper. It is recommended for wet lithographic inks for paper, plastics and metals, overprint varnishes and post-formable inks.

DEGALAN® 64/12 N distributed by DKSH is a granulated polymer based on methacrylates. It is versatile binder for concrete- and thick-layer metal coatings. It exhibits weather- and chemical resistance and lightfastness.

• It is used in marine & container coatings, primers, impregnations, exterior house- and road marking paints and plastic coatings.
• It is compatible with most PVC copolymers, nitrocellulose, chlorinated rubber, plasticizer, cellulose acetobutyrates/acetopropionate and partly compatible with alkyd and epoxy ester resins.
• DEGALAN® 64/12 N has a shelf life of 5 years and is available in Indonesia, Philippines, Vietnam, Belgium, Netherlands and Luxembourg.

EBECRYL® 860 by allnex is an epoxidized soya oil acrylate. Exhibits good hydrophilic-lipophilic balance for lithography and good surface appearance. It improves the flow and leveling of UV or electron beam (EB) curable inks and coatings. It enhances pigment & substrate wetting and adhesion when used as a modifier. Recommended for overprint varnishes for paper, lithographic ink vehicles, metal decorating and protective coatings, screen ink vehicles and pigmented wood coatings. Formulated products containing EBECRYL® 860 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain, immersion and spin coating methods, as well as flexographic, lithographic and screen printing.

EBECRYL® 375 by allnex is tetramercapto derivative designed as adhesion promotor on metal. It is used in a concentration of 2-10 % in acrylated systems to improve adhesion and flexibility. It may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. EBECRYL® 375 is recommended for use in UV/EB cured solder resists and metal- & thick coatings. The shelf life of this product is 2 years.

SETAL® 270 EHV WS-70 by allnex is an air drying long oil alkyd resin based on soyabean oils. Exhibits good color fastness, brushability, body and flow, good durability and good through hardening. Market applications of SETAL® 270 EHV WS-70 include architectural paints (finishes on wood and metal), for interior and exterior use, do-it-yourself paints, semi-gloss finishes, alkyd resin varnishes, wall paints. It is also used in boat & yacht coatings, structural steel paints and marine paints.

SETAL® 270 WS-70 by allnex is soyabean oil-based, air drying long oil alkyd resin. Offers low odor, good durability, good color fastness, brushability and flowability. SETAL® 270 WS-70 is used in architectural paints such as finishes on wood and metal, for interior and exterior use, do-it-yourself paints, semi-gloss finishes and wall paints. It is suitable for use in alkyd resin varnishes, boat and yacht coatings, structural steel paints and marine paints.

SETALUX® 57-1612 by allnex is a hydroxyl-functional acrylic resin for 2K applications. It offers fast cure, long pot-life and low VOC formulation potential. It provides very good exterior durability, UV- and chemical resistance, and excellent overall performance properties.

• It is a good modifier for both acrylic and polyester urethane.
• It is designed for topcoats, primers and single coat enamels for vehicle refinish and industrial applications.
• It is suitable for maintenance-, marine-, metal- and plastic coatings.
• SETALUX® 57-1612 has a shelf life of 3 years.