Omnipol TP by IGM Resins is a highly efficient polymeric Type I photoinitiator. It is based on TPO-L. It offers high reactivity and low odor.
- Due to its absorption spectrum, it is suitable for UV and LED lamps.
- Suitable for through-, surface- and LED cure.
- Designed for clear-, water- and pigmented system.
- Used for adhesives and graphic arts.
- The shelf life of Omnipol TP is 12 months.
Product family:
Product Type:
| CAS Number | Visible After Login |
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
For which system
Adhesives
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Omnipol TP properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Absorption Wavelength (λmax) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Assay | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Di Esters of Ethoxy Glycerol Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flash Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Molecular Weight, Mw | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volatile Content | 0.0 Visible After Login | Visible After Login | Visible After Login |