DYNAPOL® S 1359 by Evonik is a high molecular weight, slightly crystalline, thermoplastic copolyester. It is used as a raw material for hot melt industrial adhesives. DYNAPOL® S 1359 provides long open time, low water uptake and wide range of heat resistance. It shows very good adhesion to copper, aluminium, steel, paper, carboard, polyester films, PVC, leather, textiles, PC and ABS.
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
For which system
Availability
Product Status:Visible After Login
DYNAPOL® S 1359 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Glass Transition Temperature (Tg) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Softening Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity, Intrinsic | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity, Melt | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Solubility Properties | Element | Condition | Method |
|---|---|---|---|
| Insoluble in | Visible After Login | ||
| Soluble in | Visible After Login | ||
| Soluble in | Visible After Login | ||
| Insoluble in | Visible After Login | ||
| Soluble in | Visible After Login |