Visible After Login
PHASE x
QuantitY x%
Actions
Formulation
Hot Melt Styrene Butadiene Styrene Adhesive for General Assembly
Last Updated on Jun 21, 2022
Typical formulation ingredients
Visible After Login
PHASE x
QuantitY x%
Actions
Visible After Login
PHASE x
QuantitY x%
Actions
Visible After Login
PHASE x
QuantitY x%
Actions
Visible After Login
PHASE x
QuantitY x%
Actions
| PHASE | INGREDIENTS | QuantitY | Actions |
|---|---|---|---|
| x | Visible After Login | x% | |
| x | Visible After Login | x% | |
| x | Visible After Login | x% | |
| x | Visible After Login | x% | |
| x | Visible After Login | x% |
End consumer benefits
No data available
Applications
Sub-applications
Application formats
No data available
No data available
Typical properties
Lap shear strength (plywood/plywood), psi 214
Elongation, % 700
SAFT, °C 73
Tensile strength, psi 600 (draws)
Endblock / midblock ratio 51/49
Shore A hardness 90
Melt viscosity at 177°C, cp 16,000
Elongation, % 700
SAFT, °C 73
Tensile strength, psi 600 (draws)
Endblock / midblock ratio 51/49
Shore A hardness 90
Melt viscosity at 177°C, cp 16,000
Procedure
Visible After LoginVisible After Login Visible After Login-Visible After Login