Visible After Login
PHASE x
QuantitY x%
Actions
Formulation
Hot Melt Packaging Adhesives Based on Amorphous Polyolefin and Polyethylene (C)
Last Updated on Jun 21, 2022
Typical formulation ingredients
Visible After Login
PHASE x
QuantitY x%
Actions
Visible After Login
PHASE x
QuantitY x%
Actions
Visible After Login
PHASE x
QuantitY x%
Actions
Visible After Login
PHASE x
QuantitY x%
Actions
| PHASE | INGREDIENTS | QuantitY | Actions |
|---|---|---|---|
| x | Visible After Login | x% | |
| x | Visible After Login | x% | |
| x | Visible After Login | x% | |
| x | Visible After Login | x% | |
| x | Visible After Login | x% |
End consumer benefits
No data available
Applications
Sub-applications
No data available
Application formats
No data available
No data available
Typical properties
Tensile strength, mPa 10.8
T-peel strength to polyester, g/mm 52.6
Set time, sec 3.1
Elongation at yield, % 8.53
Ring and ball softening point, °C 144
Viscosity, cps @ 190°C 1190
T-peel strength to polyester, g/mm 52.6
Set time, sec 3.1
Elongation at yield, % 8.53
Ring and ball softening point, °C 144
Viscosity, cps @ 190°C 1190
Procedure
Visible After LoginVisible After Login Visible After Login-Visible After Login