Visible After Login
PHASE x
QuantitY x%
Actions
Formulation
Hot Melt Packaging Adhesives Based on Amorphous Polyolefin and Polyethylene (B)
Last Updated on Jun 21, 2022
Typical formulation ingredients
Visible After Login
PHASE x
QuantitY x%
Actions
Visible After Login
PHASE x
QuantitY x%
Actions
Visible After Login
PHASE x
QuantitY x%
Actions
Visible After Login
PHASE x
QuantitY x%
Actions
| PHASE | INGREDIENTS | QuantitY | Actions |
|---|---|---|---|
| x | Visible After Login | x% | |
| x | Visible After Login | x% | |
| x | Visible After Login | x% | |
| x | Visible After Login | x% | |
| x | Visible After Login | x% |
End consumer benefits
No data available
Applications
Sub-applications
No data available
Application formats
No data available
No data available
Typical properties
Viscosity, cps @ 190°C 1190
Elongation at yield, % 6.05
Set time, sec 1.9
Ring and ball softening point, °C 144
T-peel strength to polyester, g/mm 27.1
Tensile strength, mPa 13.2
Elongation at yield, % 6.05
Set time, sec 1.9
Ring and ball softening point, °C 144
T-peel strength to polyester, g/mm 27.1
Tensile strength, mPa 13.2
Procedure
Visible After LoginVisible After Login Visible After Login-Visible After Login