Technical datasheet
W1H (HDPE-g-MAH) (HDPE+30GF+4% W1H)
Supplied byAmoy Coace Plastic Technology- Last Updated on Jun 24, 2025
W1H (HDPE-g-MAH) (HDPE+30GF+4% W1H) by Amoy Coace Plastic Technology is maleic anhydride functionalized polymer. It is an impact modifier. It shows good heat resistance. It is compatible with PE, minerals and calcium carbonate. The dosage level of the grade is 3-8%. W1H (HDPE-g-MAH) (HDPE+30GF+4% W1H) is approved by RoHS, REACH and FDA. The shelf life of the product is 2 years.
Product family:
Product Type:
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
For which polymer
Availability
Product Status:Visible After Login
W1H (HDPE-g-MAH) (HDPE+30GF+4% W1H) properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Grafting | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |