Technical datasheet
XNB-100A
Supplied byAdvanced Composites (Mitsui Chemicals)- Last Updated on Mar 5, 2021
XNB-100A by Advanced Composites (Mitsui Chemicals) is thermoplastic olefin (TPO) elastomer grade. It is designed for processing by injection molding method. During processing of XNB-100A, holding pressure should be lower than boost pressure with a minimum amount of time to prevent over-packing of the part and screw should stop 1 to 2 seconds before mold open. Lower RPM of screw is preferred for mixing and uniform melt temperature. Injection speed should be slow to medium to prevent excessive shear on the material.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
XNB-100A properties
XNB-100A Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Barrel Nozzle Temperature | Visible After Login | Visible After Login | |
| Barrel Temperature (C1) | Visible After Login | Visible After Login | |
| Barrel Temperature (C2) | Visible After Login | Visible After Login | |
| Barrel Temperature (C3) | Visible After Login | Visible After Login | |
| Barrel Temperature (C4) | Visible After Login | Visible After Login | |
| Cushion | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |